|
| |
Closed Loop Solenoid Position Control Module
|
|
|
Features
-
Low Cost Position Control
- Small Size
- Low Weight
- High Efficiency
- Microcomputer Based
- Very High Reliability
- Pulse Width Modulated (PWM)
- Single Supply, from +9 VDC to +50 VDC
- High Supply Voltage, +50 VDC
- High Output Current 15 Amps Peak, 4 Amps RMS
- RoHS Compliant
- QUANTITIES AVAILABLE IN STOCK
|
|
Typical
Applications
- Solenoids
- Valves
- Actuators
- Voice Coil Actuators
- Hydraulics
|
|
Command Source
- Encoder Following
- 0 to +5
V or +10 V Analog
- Step and Direction
-
4 to 20 milliamps Current
Feedback
Supported
- Incremental Encoder
- 0 to +5
V or +10 V Analog
|
|
|
This module offers a very low cost solution for limited angle / stroke
position control.
The Closed Loop Solenoid Position Control Module is designed to
control the position of a solenoid plunger / shaft, voice coil
motor or similar
devices. Since the solenoid moves only in one direction, a return force
generated by another component is required. This could be a spring,
another solenoid positioned in the opposite direction or hydraulic
force.
The PID controller is easily adjusted using the onboard
potentiometers.
This product is RoHS compliant.
|
|
Performance Specifications
|
Parameter |
Min |
Typical |
Max |
Units |
| Supply Voltage |
9 |
|
50 |
VDC |
| Peak Current |
|
|
15 |
A |
| Average Current |
|
|
4 |
A |
|
Input Control
- Voltage Controlled |
0 |
|
5 |
VDC |
|
Input Control
- Current Controlled |
4 |
|
20 |
mA |
| Operating Temperature |
0 |
|
50 |
Deg C |
|
Mechanical Specifications
| Mounting Pattern |
Four 6-32 Screws |
| Dimensions |
3.00”W,
2.95”D, 0.85”H (76.2 mm, 75.0 mm, 21.5 mm) |
 |
|
Ordering Information
|
|
|
|
|
| Part No. |
Description |
Amount
|
CLSP-01
|
Single-device
Closed Loop
Solenoid
Position Control Module,
,
0-5 VDC |
Inquire |
|
CLSP-03 |
Single-device
Closed Loop
Solenoid
Position Control Module,
, 4-20 milliamps Input Signal |
Inquire |
|
