|
| |
|
|
Features
- Low Cost
- Small Size
- Low Weight
- High Efficiency
- Microcomputer Based
- Very High Reliability
- Pulse Width Modulated (PWM)
- Adjustable Maximum Pulse Width Using Onboard Trim Potentiometer
- Single Supply, from +9 VDC to +50 VDC
- High Supply Voltage, +50 VDC
- High Output Current 15 Amps Peak, 4 Amps RMS
- RoHS Compliant
- QUANTITIES AVAILABLE IN STOCK
|
|
Typical
Applications
- Motors
- Valves
- Relays
- Pumps
- Actuators
- Voice Coil Actuators
- DC Motors
- Hydraulics
- Electromagnets
- LEDs
General Specifications
- Supply Voltage, +9 to +50 VDC
- Peak Current, 15 Amp
- Average Current, 4 Amp
|
|
|
The PWM Module is designed to enable the user to vary
the voltage across a motor or other devices.
The PWM output voltage is
proportional to the input control voltage. The maximum voltage
applied to the device could be adjusted using an onboard potentiometer.
This product is RoHS compliant. |
|
Performance Specifications
|
Parameter |
Min |
Typical |
Max |
Units |
Supply Voltage |
9 |
|
50 |
VDC |
Peak Current |
|
|
15 |
A |
Average Current |
|
|
4 |
A |
|
Input Control
- Voltage Controlled |
0 |
|
5 |
VDC |
|
Input Control
- Current Controlled |
4 |
|
20 |
mA |
| Operating Temperature |
0 |
|
50 |
Deg C |
Performance Table
|
Part No. |
Input Signal |
Hold Voltage |
Hold Time |
| PWM-xx |
Analog
Voltage, 0-5 VDC or 4-20 milliamps |
Proportional to Input |
Indefinite |
Input - Output Curve
Mechanical Specifications
| Mounting Pattern |
Four 6-32 Screws |
| Dimensions |
3.00”W,
2.95”D, 0.85”H (76.2 mm, 75.0 mm, 21.5 mm) |
|
Ordering Information
|
|
| Part No. |
Description |
Amount
|
|
PWM-05 |
Single-device PWM Motor Driver Module,
0-5 VDC Input Signal |
$103.35 |
|
PWM-06 |
Two-device PWM Motor Driver Module,
0-5 VDC Input Signal |
$129.18 |
|
PWM-07 |
Single-device PWM Motor Driver Module, 4-20 milliamps Input Signal |
$129.18 |
|
PWM-08 |
Two-device PWM Motor Driver Module, 4-20 milliamps Input Signal |
Inquire |
|
|
|
|
|
|
