the motion control company
(888) 777-1826
+1 (818) 222-9200

Home About Us Site Map Contact Us
Products
Motion Controllers
Solenoid Control Electronics
Linear/ Rotary Actuators and Stages
Motors
Power Supplies
Motor Drivers
Accessories
Two-axis Joystick
Three-axis Joystick
Trackball
Operator Interface Terminal
Switch Selector
Knowledge Center
Motion Control Components
About Us
Site Map
Videos

 

High Performance Solenoid Driver,  PWM Module

Data Sheet in PDF

Similar Solenoid Controller and Driver Products

Pick and Hold Module 
Proportional (PWM) Module
Closed Loop Solenoid Position Control Module
Pick and Drop Module
Load On-Off Power Cycling Module
Dual Proportional Valve Controller
Solenoid Control System
Related Products
RS232 Control Module
Power Supplies
Features
  • Low Cost

  • Small Size

  • Low Weight

  • High Efficiency

  • Microcomputer Based

  • Very High Reliability

  • Pulse Width Modulated (PWM)

  • Adjustable Maximum Pulse Width Using Onboard Trim Potentiometer

  • Single Supply, from +9 VDC to +50 VDC

  • High Supply Voltage, +50 VDC

  • High Output Current 15 Amps Peak, 4 Amps RMS

  • RoHS Compliant 

  • QUANTITIES AVAILABLE IN STOCK

 
Typical Applications
  • Solenoids

  • Valves

  • Relays

  • Actuators

  • Voice Coil Actuators

  • DC Motors

  • Hydraulics

  • Electromagnets

  • LEDs

General Specifications

  • Supply Voltage, +9 to +50 VDC

  • Peak Current, 15 Amp

  • Average Current, 4 Amp

 

The PWM Module is designed to enable the user to vary the voltage across a solenoid or other devices. The PWM output voltage is proportional to the input control voltage. The maximum voltage applied to the device could be adjusted using an onboard  potentiometer.

The OES' RS232 Control Module with DAC option could be used to control up to four PWM Modules.
 This product is RoHS compliant.

 

Performance Specifications

Parameter

Min

Typical

Max

Units

Supply Voltage

9

 

50

VDC

Peak Current

 

 

15

A

Average Current

 

 

4

A

Input Control - Voltage Controlled

0

 

5

VDC

Input Control - Current Controlled

4

 

20

mA

Operating Temperature  0   50 Deg C

Performance Table

Part No. Input Signal Hold Voltage Hold Time
PWM-xx Analog Voltage, 0-5 VDC or 4-20 milliamps Proportional to Input Indefinite

Input - Output Curve

 

Mechanical Specifications
Mounting Pattern Four 6-32 Screws, 0.15" Diameter (3.8 mm)
Dimensions 3.00” W, 3.00” D, 0.85” H (76.2 mm, 76.2 mm, 21.5 mm)

Ordering Information
 
Part No. Description Amount
PWM-01 Single-device High Performance PWM Solenoid Driver Module, 0-5 VDC Input Signal $103.35
PWM-02 Two-device High Performance PWM Solenoid Driver Module, 0-5 VDC Input Signal $129.18
PWM-03 Single-device High Performance PWM Solenoid Driver Module, 4-20 milliamps Input Signal $129.18
       

 

 


Home | Products | Accessories | Tech Support |About Us | Terms of Use |Testimonials | Site Map | Contact Us
Optimal Engineering Systems, Inc.
Los Angeles, California, USA

Toll Free Number (888) 777-1826 in USA

+1 (818) 222-9200

Support@OESincorp.com

Please contact us for a customized solution.

Copyright ©  1998 - 2012 Optimal Engineering Systems, Inc.,
All Rights Reserved