|
| |
Solenoid Control Module
|
|
 |
|
|
Features
- Plug-and-Play
- Stand-alone
- Runs Multiple Devices Simultaneously
- Complete Unit Integrates Controller, Power Supplies and Drivers
- Quick and Easy to Install
- Very Compact and Easy to Use
- Easy Programming Language, No Compiler or Assembler Required
- Different Modes of Operation:
1) Host Controlled
2) Stand-alone, No PC Required to Operate
|
|
Typical
Applications
- Life Cycling
- Endurance Testing
- Shock and Vibration Testing
- Vibration Cancellation
Software
-
Easy System Setup and Evaluation
-
Menu Driven
- Free Software Included
|
|
|
The Solenoid Control Module is designed
for actuation of electro-mechanical components.
The typical applications of the module is actuation
solenoids, electro-magnets, relays, motors, voice coil motors, actuators, valves
and other applicable devices.
The compact and stand-alone unit consists of
controller, drivers. It conveniently connects to the serial port of the
host computer.
The module
may be controlled in different ways;
1)
Stand-alone
In this mode, the controller does not need an
external device such as a PC to operate. The
controller is programmed in a simple programming
language. The code is developed, downloaded to
the controller, run and saved in the
controller's non-volatile memory using the
supplied
Integrated Development Environment (IDE)
software.
2)
Externally Controlled
In this mode, the external host such as a PC,
micro-controller or PLC sends a series of
commands to the controller via the RS-232 serial
port. The controller processes and performs the
incoming commands and responds with proper
messages.
|
|
|
The module interfaces to a wide variety of analog and digital
transducers to monitor the output process. These include LVDTs, RVDTs,
Proximity Sensors, Accelerometers, Optical Encoders, Laser
Interferometers, Pressure Sensors and other similar devices. |
|
|
Actuators
- Linear and Rotary Solenoids
Voice Coil Actuators
Actuator Driver
- Pulse Width Modulated (PWM)
Wide Output Voltage
High Output Current
Current Controlled or Voltage Controlled
Mechanical
- 8.0" (200
mm) X 6.0" (15.002.4 mm) X 2.0'' (5.000 mm)
Power Requirement
|
Communication Interface
Feedback
Devices
LVDTs and RVDTs
Laser Interferometers
Pressure Transducers
Any Analog Signal
Absolute and Incremental Optical Encoders
General
Specifications
- Drives up to 16 Devices Simultaneously
|
Ordering Information
| Part No. |
Description |
Amount |
|
SCM-01 |
Ono-device
Solenoid Controller Module |
$695.00 |
|
SCM-02 |
Two-device
Solenoid Controller Module |
$745.00 |
|
SCM-03 |
Three-device
Solenoid Controller Module |
$795.00 |
|
SCM-04 |
Four-device
Solenoid Controller Module |
$845.00 |
|
SCM-05 |
Five-device
Solenoid Controller Module |
$895.00 |
|
SCM-06 |
Six-device
Solenoid Controller Module |
$945.00 |
|
SCM-07 |
Seven-device
Solenoid Controller Module |
$995.00 |
|
SCM-08 |
Eight-device
Solenoid Controller Module |
$1045.00 |
|
SCM-09 |
Nine-device
Solenoid Controller Module |
$1095.00 |
|
SCM-10 |
Ten-device
Solenoid Controller Module |
$1145.00 |
|
SCM-11 |
Eleven-device
Solenoid Controller Module |
$1195.00 |
|
SCM-12 |
Twelve-device
Solenoid Controller Module |
$1245.00 |
|
SCM-13 |
Thirteen-device
Solenoid Controller Module |
$1295.00 |
|
SCM-14 |
Fourteen-device
Solenoid Controller Module |
$1345.00 |
|
SCM-15 |
Fifteen-device
Solenoid Controller Module |
$1395.00 |
|
SCM-16 |
Sixteen-device
Solenoid Controller Module |
$1445.00 |
|
